Categories
Author: j2sw
Justin attended a continuing education webinar on high-density fiber optic cables put on by Corning.
Categories
Fiber terminating and OTDR testing
One of our climbers took this picture while climbing to do an install for a WISP client inside a “golf ball” water tower.
https://www.flukenetworks.com/blog/cabling-chronicles/b-c-s-fiber-polarity
Polarity defines direction of flow, such as the direction of a magnetic field or an electrical current. In fiber optics, it defines the direction that light signals travels through an optical fiber.
To properly send data via light signals, a fiber optic link’s transmit signal (Tx) at one end of the cable must match the corresponding receiver (Rx) at the other end.
https://wiki.mikrotik.com/wiki/Manual:RouterBOARD_settings#Protected_bootloader
This is a new feature which allows the protection of RouterOS configuration and files from a physical attacker by disabling etherboot. It is called “Protected RouterBOOT”. This feature can be enabled and disabled only from within RouterOS after login, i.e., there is no RouterBOOT setting to enable/disable this feature. These extra options appear only under certain conditions. When this setting is enabled – both the reset button and the reset pin-hole is disabled. Console access is also disabled. The only ability to change boot mode or RouterBOOT settings is through RouterOS. If you do not know the RouterOS password – only a complete format is possible.
Due to several opportunities, MTIN is moving toward collapsed support plan style. We will only be offering a contract support model and best effort service.
Contract Support
Customers purchase a minimum 5 hour block for $445. Rates are billed as follows.
Normal Business Hours (8am-5pm EST time) $89 per hour
Late night & Weekend support $125 per hour
Contract customers will use a minimum of 1 hour a month for remote monitoring services, firmware, and other notifications, as well as any general maintenance tasks in order to keep documentation and other aspects of the network up to date for our technicians. Remote Backups, security audits, and other services which MTIN hosts for the customer can be included in the one-hour minimum.
The goal with contract customers is to build a long-term relationship in order to help their networks grow and thrive. By being engaged with the customer on a regular basis we are able to provide better service and have a better handle on customer needs. As networks become more and more complicated having a consultant who has is more a partner than a hired gun is becoming valuable to an operator.
Tier II emergency response times for Tier II customers.
Normal working hours (3 hour maximum)
Late night and weekend (5 hour maximum)
Best Effort Plan
Customers pay as they go for best effort support. Support is available on a best effort service and first come first serve.
Normal Business Hours (8am-5pm EST time) $119 per hour
Late night & Weekend support $145 per hour
Policy details
1. Late night and Weekend is defined as. 9PM-9AM EST MONDAY-FRIDAY & 7PM EST FRIDAY -9AM Monday. Contract Customers can schedule maintenance windows and such at a discounted rate ahead of time.
2. All customers who don’t have pre-purchased time will be served on a best effort service. Priority will be given to contract customers, and then “walk-in” customers.
3. All times stated are maximum times for response. Depending on workload, times are typically much less.
4. Contact MTIN for details on this new plan.
Categories
Cambium and Management vlans
Just a quick diagram on how to separate Management traffic on an ePMP network. The aps and CPE are in bridge mode in this setup. The Cambium CPE are in bridge mode with CNPilot routers doing PPPoE, which the ISP has control over as a managed router.
Our netonix has a tagged vlan for the management interface and an untagged vlan for the customer (PPPoE traffic).
The mikrotik router is trunked to the netonix on port 12 to complete this setup.
Categories
One Way to setup your Baicells POP
One way to setup a Baicells POP using VLANs and a VPLS tunnel. The tunnel is to save Public IP space if you so desire.
The Federal Communications Commission’s Internet Freedom transparency rule, 47 CFR § 8.1, requires an Internet service provider, or ISP, to publicly disclose information about its network management practices, performance characteristics, and commercial terms of its broadband Internet access services.
https://www.fcc.gov/isp-disclosures
MTIN is now offering a full turnkey service for your website to be compliant with the Internet Freedom Transparency rule. We have two options. For a document you fill in yourself it is $200. For a turnkey document, you can export to HTML or link to a PDF from your site it is $300.
You must be logged in to post a comment.