I am starting an ongoing series involving a semi-static set of devices. These will involve different tutorials on things such as OSPF, cambium configuration, vlans, and other topics. Below is the general topology I will use for this lab network. As things progress I will be able to swap different manufacturers and device models into this scenario without changing the overall topology. We may add a device or two here and there, but overall this basic setup will remain the same. This will allow you to see how different things are configured in the same environment without changing the overall scheme too much.
We will start with very basic steps. How to login to the router, how to set an IP address, then we will move to setting up a wireless bridge between the two routers. Once we have that done we will move onto setting up OSPF to enable dynamic routing. After that the topics are open. I have things like BGP planned, and some other things. If there is anything you would like to see please let me know.
You must be logged in to post a comment.