Tag: update

Categories
Mikrotik

Mikrotik Router OS 6.36.2

To upgrade, click “Check for updates” at /system package in your RouterOS configuration interface, or head to our download page: http://www.mikrotik.com/download

v6.36.2 forum topic discussion,
http://forum.mikrotik.com/viewtopic.php?f=21&t=111450

What’s new in 6.36.2 (2016-Aug-22 12:54):

*) arm – show cpu frequency under resources menu;
*) capsman – fixed upgrade policy;
*) ccr/crs – fixed SFP+ interface ddmi info reporting function. Info is now refreshed on regular intervals;
*) conntrack – fixed ipv6 timeout display;
*) conntrack – fixed removing icmpv6 connections;
*) dns – avoid unnecessary dynamic server address saving in storage;
*) dns – allow to set query-server-timeout and query-total-timeout only greater than 0s;
*) dns – fixed lockup when dynamic dns server address 0.0.0.0 was received;
*) export – updated default values in /system routerboard settings menu;
*) partitions – fixed crash on repartition when there is not enough free space;
*) sstp – fixed disconnects on transmit for multicore systems;
*) switch – fixed configuration reload on CRS switches;
*) winbox – make queue tree default queue type default-small;

Categories
Uncategorized

Cambium Releases ePMP v 2.4.3

Software Release 2.4.3 is now avaialbe. 

The release includes the following updates: 

  • L3 Routing on the SM 
  • Multiple User Login on the GUI 
  • 4.9 GHz support under Country Other 
  • Ability to enable and disable management access on the SM from the Ethernet when Management VLAN is configured 
  • Ability to disable the SM’s primary Ethernet port 
  • Ability to disable factory default through power reset sequence

Performance Enhancements 

  • Improvements to UL Latency enhancing TCP throughput under interference 
  • Improvements to Rate Adapt mechanism in ePTP mode 
  • Memory optimization
Categories
Mikrotik

Mikrotik Router OS 6.25 released

What’s new in 6.25 (2015-Jan-19 10:11):

*) certificates – fix SCEP RA operation and SCEP client when operating with RA;
*) ppp – report authentication failure cause like in v6.6;
*) ovpn server – added support for address lists;
*) improved boot times;
*) api – fixed missing return values of some commands;
*) ntp – fixed vulnerabilities;
*) mpls/vpls have improved per core balancing on CCRs;
*) fixed queue tree no-mark matching (was broken since 6.24);
*) fixed nested simple queues (was broken since 6.24);
*) fixed occasional crash when ipv6 was used;
*) fixed route cache overflow (ipv4/ipv6 stops working) if ipsec is used;
*) fixed Omnitik upgrade from v5 where wireless config was not correctly saved
*) fixed Webfig Design Skin where some skin changes were not saved
*) WPS support added to CM2 wireless package

Simply click “Check for updates” in QuickSet, Webfig or Winbox packages menu. It should also work from v5